DATA ACQUISITION.CONTROL SYSTEMS |
|
PRODUCT.RANGE |
|
|
|
|
ENCO CONTROL |
UNIVERSAL PROGRAMMABLE CONTROLLER |
ENCO CONTROL is designed for the control of the processes of the heating substation or boiler house,
archiving data, remote exchanging thereof and communication of archive data as well as for
reading the accounting devices and communicating the readings to ENCO MS information system.
|
|
- Data communication via Ethernet, GSM/GPRS.
- Control of 1, 2 or 3 heating substation circuits.(Heating, preparation of hot water, ventilation).
- Additional functional modules are easy to integrate.
- Technological parameters of the heating substation and the data of the accounting devices are recorded in the internal archive.
|
- Message generation in case of failure.
- Extensive choise of analog and digital inputs / outputs, RS232/RS485 interface, MBus/CL, MODBUS.
- Integrated allarm function and RFID reader.
- Data acquisition from remote devices.
- Easy to integrate into other data control systems.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO LOGGER |
DATA LOGGER |
ENCO LOGGER is designed as data collection device for remote meter reading, temperature,
pressure and other sensors monitoring and their subsequent storage in the internal memory and
transmission to the ENCO MS system.
|
|
- Data communication via Ethernet, GSM/GPRS.
- Technological parameters of the heating substation and the data of the accounting devices are collected in the internal archive.
- Message generation in case of failure..
|
- Extensive choise of analog and digital inputs / outputs, RS232/RS485 interface, MBus/CL, MODBUS.
- Data acquisition from remote devices.
- Easy to integrate into other data control systems.
- Micro SD memory card.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO SMART |
DATA LOGGER |
ENCO SMART is designed as data collection device for remote meter reading, temperature, pressure
and other sensors monitoring and their subsequent storage in the internal memory and transmission to
the ENCO MS system.
|
|
- Data communication via GSM/GPRS/3G.
- Meter data communication to data base.
- Monitoring of prescribed limits of sensor parameters:temperature, pressure, insulation.
- Remote data management via TCP/RTU MODBUS.
- Protection class IP 67.
|
- Communication interfaces MBUS\CL, RS232, RS485.
- Choice of analog and digital inputs / outputs.
- Easy to integrate into other data control systems.
- Internal battery or mains power supply possibility.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO BOX |
RADIO DATA LOGGER |
ENCO BOX is designed for remote reading of the data from meters with 868MHz communication
interface.
|
|
- Power supply to the device: (8�24)V DC.
- Communication interfaces: M-Bus 2400bps, 8 e 1.
- Radio capacity 500 mW.
- RS232 communication interface.
|
- Remote configuration.
- Configurable WMbus mode: Axis (bidirectional communication), WMBus S1 and T1 mode..
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO TERMINAL |
PORTABLE RADIO DATA LOGGER |
ENCO TERMINAL is designed for remote reading of the data from meters with 868MHz communication
interface.
|
|
- Power supply to the device: from a rechargeable Li-Ion battery via a Mini USB connection.
- Internal expandable memory: Micro SD Card.
- RF868 communication interface.
|
- Graphic display: 128x128 with lighting.
- Radio capacity 500 mW. Internal radio antena.
- Configurable WMbus mode: Axis (bidirectional communication), WMBus S1 and T1 mode.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO PULSE |
PULSE ADAPTER |
ENCO PULSE is a component of the automatic readings collection system. It is used when it is
needed to collect data from meters equipped with pulse outputs. It may be used in combination with
cold and hot water, power, gas and other meters.
|
|
- Reception and summing up of pulses issued by pulse meters.
- Submission of the sum of impulses at the current moment and on the reporting date.
- Communication of data telegram to the AMR system.
|
- Data communication via Mbus, RF 868MHz type interface.
- Powered by an internal 3.6V lithium battery.
- Operating time until next replacement of the battery: 12+1 years.
- Body protection class: IP65.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO MASTER MB-6, MB-8 |
RS 232 ->M-BUS/CL/RS485 CONVERTER |
ENCO MASTER MB-6/MB-8 is designed for physical-level conversion from RS232 into M-Bus/ CL/RS485
physical level. When used as a converter from RS232 into two-wire RS485, the direction is changed
automatically.
|
|
ENCO MASTER MB-6
- Device power supply: ~230V AC.
- Maximum Mbus device quantity: up to 9 Mbus devices.
- Power supply output: 12V.
- Max output current: 0,6A.
- Interfaces: RS232 -> M-Bus; RS232 -> CL; RS232 -> RS485.
- Mounting method: On DIN rail.
|
ENCO MASTER MB-8
- Device power supply: ~230V AC.
- Maximum Mbus device quantity: up to 20 Mbus devices.
- Power supply output: 12V.
- Max output current: 0,5A.
- Interfaces: RS232 -> M-Bus.
- Mounting method: On DIN rail.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO AI |
ANALOG/MODBUS RTU CONVERTER |
ENCO AI is designed to convert analog signals to MODBUS RTU protocol.
|
|
- Device power supply: 8...24V DC.
- Pressure sensor type: 4-20mA.
- Input quantity: 2 pressure sensors..
|
- Input resistance: 120 Ohm.
- Interfaces: Analog signal ->MODBUS RTU RS485.
- Mounting method: On DIN rail.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO TAMPER |
SMART TAMPER DETECTOR |
ENCO TAMPER is designed to detect an unauthorized connections to power supply network and
automatic user disconnection. The device allows monitoring of voltage, current consumption,
leakage current and other electrical parameters.
|
|
- Enables the renewal of the electricity supply to the user as soon as the cause of disconnection is eliminated.
- Operates without an additional power supply source and disconnects users even when the voltage is disconnected (the neutral is interrupted).
- Can be either integrated into the electricity meter or used as an additional module.
- Insensitive to external, internal, variable or constant magnetic fields, which ensures protection against outages.
|
- Ensures protection against fire caused by deteriorated or worn insulation of the user�s electric network or equipment.
- Can be used for the control and monitoring of the user�s network parameters. Automatic disconnection of users in case of exceeding the set network parameters: network voltage U, current drawn I, and capacity P.
- The data can be transmitted using other data transmission devices.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO TRACE |
PIPELINE INSULATION MONITORING DEVICE |
ENCO TRACE is designed for measuring quality of pipeline insulation during exploitation. Four lines can
be monitored simultaneously.
|
|
- This device measures permeability between the conductors installed in the pipe insulation.
|
- The method used in the device allows to identify 4 situations:
- Detached (connecting contacts or conductors in a pipe are detached);.
- Short circuit (connecting contacts or conductors in a pipe are short circuit);
- Good (no moisture in pipe insulation);
- Moisture (water in the pipe insulation);
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO READER |
|
ENCO READER is designed for reading the data of the accounting devices, collection, analysis and
imaging thereof.The software package consists of two programs: data collection program �ENCO
Reader�and data imaging program using the web browser �AXIS Webserver�.
|
|
- Is used for automatic meter data collection from objects via Ethernet or GPRS communication.
- Supports standard and non-standard communication protocols of various devices.
- Independent program which operates as a service, i.e. it can automatically read the data of the specified list of devices at the time specified or at a set period.
|
- Hourly, daily and monthly statistics of accounting data.
- Filtration of data by the object, address, location of the installation, measuring parameter, date and time.
- Generating events and notifications to ENCO MS system or e-mail.
- Visualisation using the web browser (WEBserver)..
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO MS |
INFORMATION SYSTEM |
ENCO MS information system is designed for the collection and monitoring of data as well as for the
control of objects.ENCO MS information system may be applicable in heating, water, power and gas
systems for the monitoring and control of machinery, collection of data, protection of premises and
buildings and control of authorized and unauthorized access to utilities.
|
|
- The possibility to receive data regarding an object and to analyze it at any chosen moment.
- The possibility to save energy resources and reduce the costs of utilities and administration of buildings.
- The possibility to combine the system with other information systems via data exchange interfaces.
- Remote control of the devices equipped with standard interfaces.
|
- The system is accessible by the users / clients via the WEB interface. A user / client does not need to buy and install any specialized software.
- The system supports various ways of data communication: GSM/ GPRS, TCP/IP,PSTN.
- Delivery of information notifications in the manner convenient to the user / client (SMS; WEB; e-mail).
- Convenient and quick data collection avoiding mistakes related to the �human factor�.
|
|
DOWNLOAD DATASHEET | |
|
|
|
|
|
|
|
ENCO PIPE |
|
The system �ENCO Pipe� is designed for monitoring the operating parameters of heating and other
pipeline routes as well as for monitoring operation. It is a tool which ensures high-quality support and
adjustment of the parameters of pipeline routes; it enables quick localization and reaction at the
location of failure.
|
|
- Pressure and temperature sensors as well as equipment for monitoring the quality of the insulation of channel-free pipeline routes are monitored in the hydraulic network.
- Constant synchronization of time in the objects takes place.
- Intermittently monitors the parameters of the network, records and collects their data, enables analyzing the data collected.
|
- Enables quick localization and reaction at the location of failure.
- The parameters of the monitored network are communicated to the central control panel.
- WEB interface enables easy adaptation of the system (additional software is not necessary when installing new workplaces).
|
|
DOWNLOAD DATASHEET | |
|
|
|
|